O MON Power Plant

O MON Power Plant

Background

Omon thermal powder plant in Can Tho province South Vietnam represents a US$536 million dollar investment by EVN (Electricity of Vietnam). The plant was designed by Tokyo Electric Power Services Company Limited (TEPSCO) and was constructed by the projects EPC Mitsubishi Heavy Industries (MHI) Company Limited of Japan. The project is based on 2 x 300MW oil fired generators. The first will be online in late 2009 and construction of the second is planned for a later date.

Operating Conditions

As with all heavy oil fired power stations international regulations require construction of a Flue Gas Desulphurisation Plant (FDG) to manage and protect the surrounding environment from the acid fumes generated from burning the sulphur containg oil. The FGD is a complete self-contained unit that scrubs the hot acidic fumes generated from burning oil and effectively treats all waste so it can be disposed of safely.

Special Requirements

At Omon the maximum operating temperature inside the FGD was designed to be 105ºC. The flue gases from burning oil contain many corrosive materials; specifically sulphur dioxide which, in the presence of moisture can form concentrated sulphuric acid. This and materials used in the FGD process are highly corrosive to normal construction materials such as steel and concrete and therefore corrosion protection of these assets are required to maintain a long operational life span.

Corrosion Protection

The highly corrosive atmosphere coupled with the high temperatures in the FGD equipment means special attention has to be paid to the engineering and material selection for the corrosion protection.

System

The FGD unit at Omon Power had the following assets protected from corrosion:

  • Absorber
  • Inlet and Outlet Ducting
  • Gas Gas Heater
  • Regent and Process Water Storage Tanks

High temperature grade Novalac Vinyl Ester Resins System were used the product type matched to the operating conditions. Areas of high temperature Heavy Duty Glass Flake Filled Linings were used. Areas of high abrasion in slurry tanks were coated with Aluminium Oxide Filled Lining Systems. General areas were coated with glass filled vinyl ester coatings.

Project Details

Location Can Tho Vietnam
Project O Mon Thermal Power
Owner EVN / Tepsco
EPC MHI
Date 2008
Work FGD Unit
System Vinyl Ester
Area 6,000 m2
Value US$ 1.2 Million